| Properties |
Limits |
Appropriate Standards |
| Operating Temperature |
–55°C to +70°C |
MIL-STD-810E |
| Storage Temperature |
–62°C to +95°C |
Method 501.3 Procedure II
Method 502.3 Procedure II |
| EMC |
CE01, CE03
CS01, CS02, CS06
RE01, RE02
RS01, RS02, RS03 |
MIL-STD-461D
DEF.STAN 59-41
BS3G100
TEMPEST |
| Power Inputs |
28V DC
115V / 400 Hz Single-Phase
115V / 400 Hz Three-Phase |
MIL-STD-704A and -704E
MIL-STD-1275A
DEF.STAN 61-5 (Naval)
MIL-STD-1399 (Naval)
EN50155 / RIA12 (Railway)
|
| Wiring |
Limited Toxicity |
MIL-C-24643
DEF.STAN 61-12
DEF.STAN 66-31 |
| Mechanical |
| Arinc 404A
Complies with IEEE 1101.2
|
| IP Rating |
IP68
IM Immersion
|
MIL-STD-810E
Method 512.3 Procedure I |
| Vibration |
15 to 2,000 Hz at 0.1g2 / Hz (RMS ~ 12g) |
MIL-STD-810E
Method 514.4 Category 5
MIL-STD-167
DEF.STAN 66-31 |
| Shock |
20g for 11mS |
MIL-STD-810E
Method 516.4 Proc I & VI |
| Acceleration |
13.5g |
MIL-STD-810E
Method 513.4 Proc I & II |
| Altitude |
50,000 ft |
MIL-STD-810E
Method 500.3 Procedure II
|
| Humidity |
95% NC for 240 Hours |
MIL-STD-810E
Method 507.3 Procedure III |
| Salt Fog |
5% for 48 Hours |
MIL-STD-810E
Method 509.3 |
| Fungal Growth |
No Growth |
MIL-STD-810E
Method 508.4 |
| Thermal Shock |
Rapid change over Storage & Operational Temperature range |
MIL-STD-810E
Method 503.3 Procedure I |
| Sand & Dust |
Sand @ 5700 ft /min
Dust @ 1750 ft /min |
MIL-STD-810E
Method 510.3 Proc I & II |
| Epoxy Paint Finish |
Resistant to contaminants |
MIL-C-22750F
DTD-5555A |
![Elma-Mektron logo - [home]](../images/logo3.gif){kind=logo}
